Roberts Radio CRD-37 User Manual

Page 28

11. When the clock radio display is set to show both time and date the

alarm symbol will appear if an alarm is set. To toggle between the
large time display and the time and date display press the Display
button.

Note: When the alarm is set to wake by radio, the last used station will be
switched on at the alarm time. The radio alarm volume will be the volume
previously listened to when setting up the alarm.

When the alarm activates, the volume will start from minimum and increase
in level every 2-3 seconds. The alarm will sound for 90 minutes unless
cancelled.

Make sure that a CD has been inserted when choosing CD as the alarm
mode. If a CD is not present at the alarm time, the buzzer alarm will be
used instead.

View the alarm time

1. Repeatedly

press

the

Alarm button to view the time settings for

Alarm 1 to Alarm 4.

To cancel the alarm

1. While an alarm is sounding it can be cancelled for 24 hours by pressing

the On/Off button.

2. To permanently cancel an alarm, enter the alarm setup menu for the

alarm that you wish to cancel, and set the alarm mode to the "OFF"
option (see step 9 on the preceding page).