Renesas Converter Board M3T-FLX-144NSE - Manual (Page 4)

(2/4)
1. Outline
The M3T-FLX-144NSE is a converter board for connecting the
160-core flexible cable FLX160 to a foot pattern for 144-pin
0.4-mm-pitch TQFP (144PFB-A).
2. Package Components (See Figure 1)
(1) M3T-FLX-144NSE converter board
(2) YQPACK144SE (made by Tokyo Eletech Corporation)
(3) NQPACK144SE (made by Tokyo Eletech Corporation)
(4) YQ-GUIDE (4 pieces) (made by Tokyo Eletech
Corporation)
(5) M3T-FLX-144NSE User's Manual (This manual)
3. Specifications
Table 1 Specifications
Applicable package
144PFB-A
(144-pin 0.4-mm-pitch TQFP)
Insertion/removal
iterations of connector
50 times guaranteed
4. Usage (See Figure 2)
The M3T-FLX-144NSE can be used for debugging and board
mounted evaluation in common by mounting the
NQPACK144SE on the target system.
(1) For debugging
Mount the NQPACK144SE and YQPACK144SE on the
foot pattern of the target system in that order. And connect
the probe of the emulation pod to the upper connector of
the M3T-FLX-144NSE. Then connect the
YQPACK144SE and the M3T-FLX-144NSE.
(2) For onboard evaluation
Mount an MCU with on-chip flash memory or one-time
PROM and the HQPACK144SE (separately available) in
that order on the NQPACK144SE on the target system.
Before using the M3T-FLX-144NSE, be sure to read "7.
Precautions" on page 4.
Figure 1 Package components of the M3T-FLX-144NSE
Figure 2 Usage of the M3T-FLX-144NSE
Probe of emulation pod
(1) Debugging
M3T-FLX-144NSE
YQ-GUIDE (x4)
YQPACK144SE
NQPACK144SE
144-pin 0.4-mm-pitch
(144PFB-A) foot pattern
(2) Onboard evaluation
HQPACK144SE
(separately available)
MCU with on-chip flash
memory or one-time PROM
: No. 1 pin
Be sure to align the pins.
M3T-FLX-144NSE
YQ-GUIDE (x4)
YQPACK144SE
NQPACK144SE