Renesas M3T-F160-80NRA - Manual (Page 4)

(2/4)
1. Outline
The M3T-F160-80NRA is a converter board for connecting the
160-core flexible cable FLX160 to a foot pattern for 80-pin
0.8-mm-pitch QFP (80P6N-A) and LQFP (80P6U-A).
2. Package Components (See Figure 1)
(1) M3T-F160-80NRA converter board............................ 1 pc.
(2) NQPACK080RA (made by Tokyo Eletech Corporation) ................ 1 pc.
(3) YQPACK080RA
(made by Tokyo Eletech Corporation)
................ 1 pc.
(4) YQSOCKET080RAF
(made by Tokyo Eletech Corporation)
......... 1 pc.
Pre-mounted on the converter board M3T-F160-80NRA
(5) YQ-GUIDE’s
(made by Tokyo Eletech Corporation)
....................4 pcs.
(6) M3T-F160-80NRA User's Manual (This manual)
3. Specifications
Table 1 Specifications
Applicable package
80P6N-A, 80P6U-A
(80-pin 0.8-mm-pitch QFP/LQFP)
Insertion/removal
iterations of connector
50 times guaranteed
4. Usage (See Figure 2)
The M3T-F160-80NRA can be used for debugging and
board-mounted evaluation in common by mounting the
NQPACK080RA on the user system.
(1) For debugging
Mount the NQPACK080RA on the foot pattern of the user
system and attach the YQPACK080RA on it. And connect
the probe of the emulation pod to the upper connector of
the M3T-F160-80NRA. Then connect the
YQPACK080RA and the M3T-F160-80NRA.
(2) For onboard evaluation
Mount an MCU with on-chip flash memory or one-time
PROM and the HQPACK080RA168 (separately available)
or HQPACK080RA160 (separately available) in that order
on the NQPACK080RA on the user system.
Before using the M3T-F160-80NRA, be sure to read "6.
Precautions" on page 3.
M3T-F160-80NRA
YQ-GUIDE (x4)
YQPACK080RA
NQPACK080RA
Figure 1 Package components of the M3T-F160-80NRA
M3xxxxT-RLFS,
FLX160-PRB
or
M3xxxxTx-EPB
(1) For debugging
M3T-F160-80NRA
YQ-GUIDE (x4)
YQPACK080RA
NQPACK080RA
80-pin 0.8-mm-pitch
foot pattern
(2) For on-board evaluation
For 80P6N-A package:
HQPACK080RA168
(separately available)
For 80P6U-A package:
HQPACK080RA160
(separately available)
MCU with on-chip flash
memory or one-time PROM
: No. 1 pin
Be sure to align the pins.
Figure 2 Usage of the M3T-F160-80NRA