Radio Shack XL-150 - Manual (Page 24)

24
Replacing the Blade-Type
Fuse
1. Disconnect the cable from the
vehicle’s negative (–) battery ter-
minal.
2. Grasp the fuse’s plastic end and
pull it out.
3. If the fuse is blown, replace it. Use
only a blade-type fuse with the
proper rating (such as Cat. No.
270-1084). The fuse must be 25
amps.
4. Grasp the fuse’s plastic end and
push it in.
5. Reconnect the cable to the vehi-
cle’s negative (–) battery terminal.
(illustration - show
surrounding area,
fuse holder, and fuse
being pulled out)
12-2015.fm Page 24 Tuesday, July 13, 1999 3:47 PM