Radio Shack XL-150 - Manual (Page 17)

17
4. Drill 9 /
64
-inch (3.57 mm) holes at
the marked locations, being care-
ful not to damage anything behind
the mounting surface.
5. Secure the amplifier to the mount-
ing surface using the supplied
sheet metal screws and washers.
6. Reconnect the wiring.
7. Reconnect the cable to the vehi-
cle battery’s negative (–) terminal.
8. Reset your vehicle’s clock, your
autosound system’s tuner mem-
ory, and other timer/memory
devices.
12-2015.fm Page 17 Tuesday, July 13, 1999 3:47 PM