Roland VE-20 - Manual (Page 7)

7
Es
p
a
ñ
o
l
P
o
rt
ug
uê
s
Ne
der
la
n
ds
Italian
o
Fr
an
ça
is
De
u
tsc
h
Eng
lis
h
Making the Connections
• When using an AC adaptor, be sure to use only the specified type (PSA series; optional). Using an adaptor other than the
specified type may cause the unit to malfunction, or cause damage to the unit.
• To prevent malfunction and/or damage to speakers or other devices, always turn down the volume and turn off the
power to all devices before making any connections.
• Some connection cables contain resistors. When connection cables with resistors are used, the sound level may be
extremely low, or impossible to hear. For information on cable specifications, contact the manufacturer of the cable.
• Before you make connections, make sure that the input gain or volume of your mixer or recorder is turned down. By
turning on devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices.
• This unit is equipped with a protection circuit. A brief interval (a few seconds) after power-up is required before the unit
will operate normally.
If you want to use a cable with a 1/4 inch phone plug to connect the VE-20 to your mixer or audio system, use the PHONES/
LINE jack. Use a Y-cable (such as the Roland PCS-31L, optional) to make connections.
Points to check beforehand
If you’re performing at a live event where someone other than yourself is responsible for running the sound system, it’s a
good idea to inform them that you intend to use an in-line effects processor (the VE-20) on your mic. This will allow them to
make sure that necessary equipment such as connection cables are available, and will help the rehearsal and the actual
performance go smoothly.
Caution when making connections
Numerous types of PA equipment are used in a live event. Unexpectedly breaking a connection can produce high-volume
noise, and may even damage equipment. Before you turn the VE-20’s power on/off, or connect or disconnect the cables, be
sure to check with a staff member and obtain their permission.
Using the VE-20 live
Mic
AC Adaptor
(PSA series; optional)
Stereo
Headphones
Mixer, Recorder, etc.
Mic
PCS-31L
(optional)
Mixer Extension cable (as needed)
White (L)
Red (R)
VE-20_e.book 7 ページ ２００９年７月３０日 木曜日 午後８時１３分