Roland VE-20 - Manual (Page 15)

15
Convenient Functions
Es
p
a
ñ
o
l
P
o
rt
ug
uê
s
Ne
der
la
n
ds
Italian
o
Fr
an
ça
is
De
u
tsc
h
Eng
lis
h
You can use the Phrase Loop function to record
your voice unprocessed by any effects, and then
play back your recorded voice while you audition
sounds or make adjustments.
1. Press the MENU button.
2. Press the cursor button ( ) to select the
LoopType.
3. Turn the SOUND knob to select Check.
4. Press the EXIT button to return to the Play
screen.
With the above setting, you can use the Phrase
Loop function as a “sound check” function.
For details on the Phrase Loop function , refer to
“Using Phrase Loop to Layer Your Voice”(p. 13).
* When Phrase Loop is in sound check mode, you can’t layer
overdubbed phrases. If you press the ON/OFF pedal while
a recorded phrase is playing, the phrase is erased and a
new recording begins.
Here’s how to save the sound as a different User
sound.
This is convenient when you want to save a preset
sound that you’ve edited, or when you want to
create a new sound that’s based on an existing
sound.
* Once you carry out this procedure, you’ll lose any previous
sound settings contained in the storage destination.
1. Press the MENU button.
2. Turn the SOUND knob to select WRITE.
3. Press cursor button ( ).
The REC indicator blinks, and the Write screen
appears.
4. Turn the SOUND knob to select the write-
destination sound.
If you decide not to execute the Write operation,
press the EXIT button to return to the previous
screen.
5. Press the ON/OFF pedal.
The sound is saved.
* Never turn off the power before the display indicates
“COMPLETED!”.
You can change the order of the user sounds by
exchanging them.
1. Turn the SOUND knob to select one of the
sounds that you want to exchange.
2. Press the MENU button.
3. Turn the SOUND knob to select WRITE.
4. Press the cursor button ( ) to select
EXCHANGE.
The REC indicator blinks, and the Exchange
screen appears.
5. Turn the SOUND knob to select the other
sound with which you want to exchange the
currently selected sound.
If you decide not to execute the Exchange
operation, press the EXIT button to return to the
previous screen.
6. Press the ON/OFF pedal.
The sounds are exchanged.
* Never turn off the power before the display indicates
“COMPLETED!”.
Using your recorded voice to
make adjustments (Sound Check)
Saving a sound as a different
User Sound
Exchanging sounds
Sound name of the write destination
Sound number of the write destination
Sound name of the exchange destination
Sound number of the exchange destination
VE-20_e.book 15 ページ ２００９年７月３０日 木曜日 午後８時１３分