Radio Shack Two-Line Caller ID Phone With Speakerphone - Manual (Page 19)

19
• If a displayed phone number is more
than twelve characters, the rest of
the Caller ID information scrolls au-
tomatically.
Area Code
Your phone allows you to pre-store five
area codes of three digits. When you
dial a Caller ID number by pressing the
CALL BACK button, only the last seven
digits will be dialed if the area code of
the dialed Caller ID number matches
one of the area codes you stored previ-
ously.
Follow these steps to store an area
code:
1. Press STORE . LOCATION? appears
on the display.
2. Press CALL BACK . AREA CODE NO.
1 appears on the display.
3. Press REVIEW
8
or
9
to select a
location (1–5) where you want to
store the area code.
4. Enter the area code you want to
store using the number keys ( 0 – 9 ).
5. Press STORE . The phone sounds a
tone.
6. Press STORE again to exit.
Note: You may edit a stored area code
by repeating Steps 1– 4.
Follow these steps to review stored area
codes.
1. Press STORE . LOCATION? appears
on the display.
2. Press CALL BACK . AREA CODE NO.
1 appears.
3. Press REVIEW
8
or
9
to review
the area codes which you stored
previously.
4. Press STORE to exit.
Follows these steps to delete stored
area codes.
1. Press STORE . LOCATION? appears.
2. Press CALL BACK . AREA CODE NO.
1 appears.
3. Press REVIEW
8
or
9
to select
the area code you want to delete.
4. Press DELETE .
5. Press STORE to exit.
Dialing Numbers In Call
Records
For your phone’s Caller ID memory dial
feature to operate, the record must con-
tain the caller’s number.
Follow these steps to dial a number
stored in a call record.
1. Press LINE 1 or LINE 2 to select a
phone line.
2. Repeatedly press REVIEW
8#
or
9
until the phone number you
want to dial appears.
3. If the Caller ID record has the same
area code as one you have stored,
press
CALL BACK and the phone di-
als only the last 7 digits of the num-
ber.
43-935.fm Page 19 Friday, January 14, 2000 3:07 PM