S8 e – ResMed S8 User Manual
Page 20
15
E
NG
LISH
H
OW
TO
USE
THE
K
EYPAD
B
ACKLIGHTS
The keypad and LCD are equipped with backlights that come on when the device is
powered. The LCD backlight turns off after two minutes of inactivity, and comes back
on when you press a key. Once the
Start/Stop key has been pressed to start
treatment, the LCD backlight stays on for two minutes. The keypad backlight is always
on while the
S8 E
SCAPE
is on.
H
OW
TO
C
HANGE
THE
S
ETTINGS
ON
YOUR
S8 E
SCAPE
You can change settings (such as Ramp Time, Altitude) on the
S8 E
SCAPE
by using the
keypad and LCD. When the
S8 E
SCAPE
is in standby mode you can display a series of
screens (a menu) on the LCD screen in order to view and change the settings for a
particular function.
Use the menu screens to change the ramp time, altitude compensation and language.
You can also view details about the usage and software version of your
S8 E
SCAPE
.
H
OW
TO
ENTER
THE
MENU
SCREENS
When the
S8 E
SCAPE
standby screen is displayed you will see the word ‘Menu’ in the
left-hand corner. To select the
S8 E
SCAPE
menu, press the
Left key.
H
OW
TO
SCROLL
THROUGH
THE
MENU
When you are in the menu, scroll through items by pressing the
Up or Down keys.
H
OW
TO
CHANGE
A
SETTING
OPTION
When you have scrolled to the item you require:
1. Press the
Left key (Change).
2. Press the
Up or Down keys until you see the setting option that you require.
3. Press the
Left key (Apply) to select the setting option.
If you wish to exit without changing the option, press the
Right key (Cancel).
S8 ESCAPE
S8 CLASSIC
RAMP 10min
Menu
S8 CLASSIC
PATIENT MENU
ALT: 0-610m
Change Exit
USED HRS: 960
Exit
USAGE: 120/180
Exit
SW: SX123456789
Exit
LANG: ENGLISH
Change Exit
338223r1.book Page 15 Friday, June 3, 2005 4:16 PM