Roland Audio Processor SL-20 - Manual (Page 11)

11
Operating the SL-20
Panel Operation
Setting the Tempo
Turn the TEMPO knob to the right to
increase the tempo; to slow the tempo down,
turn the knob to the left.
You can adjust the tempo more precisely by
turning the knob slowly.
* The tempo setting is stored in memory.
* You cannot set the tempo with the SL-20 while
MIDI clock is being received.
Switching the Slice Pattern
Use the BANK knob and PATTERN
knob to switch slice patterns.
The HARMONIC (BANK knob positions 4
and 5) contains slice patterns with melodic
content.
Adjusting the Attack and
Duty
To increase the volume of the attack, turn the
ATTACK knob to the right.
To increase the length of the sound, turn the
DUTY knob to the right.
Adjusting the Effect Level
Use the EFFECT LEVEL knob to adjust
the volume levels of the effect sound.
Adjusting the Direct Level
Use the DIRECT LEVEL knob to adjust
the volume levels of the direct sound when
the effect is on.
Switching the Output Mode
Use the OUTPUT MODE button to
switch the output mode.
* You can select the output mode only when
connected for stereo output. MONO is selected
when the SL-20 is connected in monaural.
* For more detailed information about the output
mode, refer to “OUTPUT MODE Button” (p. 3).
Switching the Pedal Mode
Use the PEDAL MODE button to switch
the pedal mode.
* For more detailed information about the pedal
mode, refer to “PEDAL MODE Button” (p. 3).
4
2
3
7
8
1
5
6
9
SL-20_e.book 11 ページ ２００８年３月２８日 金曜日 午前８時２８分