Error messages/other messages, 49 error messages/other messages – Roland DP-970 User Manual
Page 49
49
Error Messages/Other Messages
In the upper range, the
sound changes abruptly
beyond a certain key
On an acoustic piano, notes in the upper
one and a half octaves of the keyboard
continue to sound until they decay
naturally, regardless of the damper pedal.
There is a difference in the timbre as well.
Roland pianos faithfully
simulate such characteristics of the acoustic
piano. On the DP-970, the range that is
unaffected by the damper pedal will
change depending on the Key Transpose
setting.
A High-pitched whine is
produced
When listening through headphones:
Some of the more flamboyant and
effervescent piano tones feature an
ample high-end component, which
may make the sound appear to have
metallic reverberation added. Since this
reverberation becomes particularly
audible when supplemented by heavy
reverb, you may be able to diminish the
problem by reducing the amount of
reverb applied to the sound.
When listening through speakers:
Here, a different cause (such as
resonance produced by the DP-970)
would be suspect. Consult your Roland
dealer or nearest Roland Service
Center.
Case
Cause/Remedy
The bass range sounds
odd, or there is a
vibrating resonance
When listening through speakers:
Playing at loud volumes may cause
instruments near the DP-970 to
resonate.
Resonation can also occur with
fluorescent light tubes, glass doors, and
other objects. In particular, this
problem occurs more easily when the
bass component is increased, and when
the sound is played at higher volumes.
Use the following measures to suppress
such resonance.
• Place speakers so they are 10–15 cm
from walls and other surfaces.
• Reduce the volume.
• Move the speakers away from any
resonating objects.
When listening through headphones:
Here, a different cause would be
suspect. Consult your Roland dealer or
nearest Roland Service Center.
Case
Cause/Remedy
Error Messages/Other Messages
*
Error messages are indicated by an “E.” before the number. Press any button, and you can cancel the error message.
Display
Meaning
S. U
Indicates the song has been backed up.
USr
User Song. Stores recorded performances (p. 34).
USr.
The “.” in the display indicates that there is performance material already
recorded (p. 34).
S.
PU
This appears when a song with a pickup (a song that does not start on the
first beat) is played back.
dEL
This appears when you attempt to delete a recorded song (p. 33, p. 38).
E.32
The amount of performance information is too large, and further
recording is not possible.
E.41
A problem such as a loose MIDI cable occurred. Make sure the MIDI
cables are correctly hooked up.
_._._.
V-LINK function is On (p. 44).
DP-970_e.book 49 ページ 2005年10月7日 金曜日 午後4時15分