Roland DP-970 - Manual (Page 39)

39
Chapter 4. Recording Your Performance
Saving Recorded Songs Even with the
Power Turned Off (Song Backup)
Normally, any songs you have recorded are deleted when you turn off the power to
the DP-970. However, if you wish, you can have such recorded songs be saved even
while the power is turned off. This function is called “Song Backup.”
1
Hold down the [Split] button, and press the [Reverb] button.
The DP-970 switches to the function mode.
2
Press the [Song/Tempo] button.
The button’s indicator flashes.
The following appears in the display.
fig.
3
Press the [Rec] button.
The display flashes, and Song Backup is executed.
When Song Backup is finished, the display and buttons return to their normal
appearance.
■ Deleting backed up songs
* You can delete backed up songs only when you have no songs recorded.
1
Hold down the [Split] button, and press the [Reverb] button.
The DP-970 switches to the function mode.
2
Press the [Song/Tempo] button.
The following appears in the display.
To cancel the procedure, press the [Split] button or the [Reverb] button.
3
Press the [Rec] button.
The backed up song is deleted.
The display and buttons return to their normal appearance.
1 2 3
You can select and play
songs that have been
backed up in the same way
as you do with the internal
songs (p. 15) . Songs that
have been backed up are
indicated in the display as
shown below.
DP-970_e.book 39 ページ ２００５年１０月７日 金曜日 午後４時１５分