Radio Shack ET-554 - Manual (Page 7)

7
3. Route the adapter’s cord through
the strain relief slot on top of the
base.
4. Plug the adapter into a standard AC
outlet.
5. Plug the modular cord’s other end
into a modular phone line jack.
6. Fully extend the base’s antenna and
place it in a vertical position.
Mounting the Base
on a Wall Plate
1. Plug one end of the supplied short
modular cord into the TEL LINE jack
on the back of the base.
2. Insert the supplied AC adapter’s
barrel plug into the DC IN 9V jack on
the back of the base.
P U L S E - T O N E
D C IN 9 V
T E L LI N E
43-1053.fm Page 7 Tuesday, August 17, 1999 1:26 PM