Radio Shack ET-554 - Manual (Page 15)

15
USING REDIAL
REDIAL lets you quickly dial the last num-
ber dialed. When you hear a dial tone,
simply press
REDIAL .
Notes:
• The redial memory holds up to 32
digits, so you can redial long-dis-
tance as well as local numbers.
• The redial memory also holds pause
entries. (See “Entering a Pause” on
Page 17.)
• The redial memory does not store a
flash entry or any digits you press
after
FLASH (see “Using Flash”).
USING FLASH
FLASH performs the electronic equiva-
lent of a switchhook operation for special
services, such as Call Waiting.
For example, if you have call waiting,
press
FLASH to answer an incoming call
without disconnecting the current call.
Press
FLASH again to return to the first
call.
Note: If you do not have any special
phone services, pressing
FLASH might
disconnect the current call.
USING TONE SERVICES
ON A PULSE LINE
Some special services, such as bank-by-
phone, require tone signals. If you have
pulse service, you can still use these
special tone services by following these
steps.
1. Be sure PULSE
•
TONE is set to
PULSE .
2. Lift the handset from the cradle or
press TALK .
3. Dial the service’s main number.
4. When the service answers, press
TONE . Any additional numbers you
dial are sent as tone signals.
43-1053.fm Page 15 Tuesday, August 17, 1999 1:26 PM