RIDGID R3001 - Manual (Page 8)

8
FEATURES
PRODUCT SPECIFICATIONS
Input .................................................................................................................................. 120 V, 60 Hz, AC Only, 11.0 Amps
Switch.............................................................................................................................................................. Variable Speed
No Load Speed ................................................................................................................................................... 0-2,800/min.
Stroke Length............................................................................................................................................................. 1-1/8 in.
Net Weight....................................................................................................................................................................8.4 lbs.
Fig. 1
®
�
®
BLADE CLAMP
LOCK/RELEASE LEVER
BASE (SHOE)
ASSEMBLY
SAW BLADE
ILLUMINATED PLUG
INSULATED GRIPPING
SURFACE
INSULATED
GRIPPING
SURFACE
VARIABLE SPEED
SWITCH
KNOW YOUR RECIPROCATING SAW
See Figure 1.
Before attempting to use this product, familiarize yourself
with all operating features and safety rules.
BASE (SHOE) ASSEMBLY
The base assembly of the reciprocating saw pivots up and
down in both directions. The base is adjustable, allowing the
use of the blade teeth at different positions on the blade.
EXTERNALLY ACCESSIBLE BRUSHES
Externally accessible brushes extend the life of the
machine.
ILLUMINATED PLUG
This saw is equipped with a plug that illuminates when power
is supplied to the tool. This allows the operator to easily
identify live tools.
TOOLLESS BLADE CLAMP
Your saw has a blade clamp design that does not require
the use of a tool (blade wrench) when installing or removing
the blade.
VARIABLE SPEED SWITCH
The variable speed switch delivers higher speed with
increased pressure and lower speed with decreased
pressure.
EXTERNALLY ACCESSIBLE BRUSH