RIDGID R7111 - Manual (Page 8)

8
FEATURES
Fig. 1
PRODUCT SPECIFICATIONS
Chuck ....................................................................... 1/2 in.
Switch ............................. VSR (Variable Speed Reversible)
No Load Speed ....................................0-850 r/min. (RPM) Input ............................... 120 V, 60 Hz, AC only, 8.0 Amps
Net Weight ................................................................. 5 lbs.
KNOW YOUR DRILL
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator’s manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
AUXILIARY HANDLE ASSEMBLY
Your drill is equipped with an auxiliary handle assembly. For
ease of operation, you may use the handle with either the
left hand or the right hand.
DIRECTION OF ROTATION SELECTOR
(FORWARD/REVERSE)
Your drill has a direction of rotation (forward/reverse) selector
located above the switch trigger for changing the direction
of bit rotation.
LIGHTED PLUG
The lighted plug helps to easily identify live tools.
LOCK-ON BUTTON
The lock-on button is convenient for continuous drilling for
extended periods of time.
VARIABLE SPEED
The variable speed switch trigger delivers higher speed with
increased trigger pressure and lower speed with decreased
trigger pressure.
DIRECTION OF ROTATION SELECTOR
(FORWARD/REVERSE)
LOCK-ON
BUTTON
SWITCH TRIGGER
LIGHTED PLUG
AUXILIARY HANDLE ASSEMBLY
CHUCK