RSA Security 6.1 - Manual (Page 58)

46 Administering RADIUS Clients September 2005
Adding a RADIUS Client
To add a RADIUS client:
1 Open the RADIUS Clients panel.
2 Click the Add button.
The Add RADIUS Client window ( Figure 12 ) opens.
Figure 12 Add RADIUS Client Window
3 Enter the name of the RADIUS client in the Name field.
Although you can assign any name to a RADIUS client entry, you should use
the device's hostname to avoid confusion.
You can create a special RADIUS client entry called
by clicking the
Any RADIUS Client checkbox ( Figure 13 ). The RADIUS client
enables RSA RADIUS Server to accept requests from any RAS, as long as
the shared secret is correct.
Figure 13 Creating an RADIUS Client
Note that the IP Address field for an RADIUS client cannot be
edited. implies that the server accepts requests from any IP address,
provided that the shared secret is correct.