RCA H5401 - Manual (Page 24)

4
Deleting the Current Caller ID Record
To delete only the record in the display:
1. Use the CID/4 button and then VOL ( 6 or 5) button to display the desired Caller
ID record.
2. Press Delete/Mute.
Deleting All Caller ID Records
To delete all the Caller ID records in memory:
1. Use the CID/4 button and then VOL ( 6 or 5) button to display any Caller ID
record.
2. Press and hold Delete/Mute. The display asks DELETE ALL? for several seconds.
3. Press Delete/Mute again, within five seconds, to erase all records. The display will
return to standby mode.
Caller ID Errors
If there is an error in the transmission of information to your Caller ID phone,
INCOMPLETE DATA is displayed.
If you have not subscribed to Caller ID service or it is not working, NO DATA is
displayed.
Call Waiting Caller ID
Provided you subscribe to Caller ID with Call Waiting service from your phone
company, you may see who is calling when you hear the call waiting tone in the
receiver. The CID information appears in the display after you hear the tone.
Press the Flash/Exit button to put the current call on hold and answer the incoming call.
Press Flash/Exit again when you want to return to the first call.
IMPORTANT: In order to use all of the features of this unit, you must subscribe to either
the standard Name/Number Caller ID Service or Call Waiting Caller ID Service. To know
who is calling while you are on the phone, you must subscribe to Call Waiting Caller ID
Service.
Caller ID