RCA H5401 - Manual (Page 13)

1
Auto Talk
1. Press Menu button once, then press the VOL ( 6 or 5) buttons until PHONE
SETTING is displayed.
2. Press Select/Save button to select.
3. Use the VOL ( 6 or 5) buttons of the sub-menu until AUTO TALK is displayed.
4. Press Select/Save button to select.
5. Use the VOL ( 6 or 5) buttons to select ON or OFF. Select ON to let the handset
pick up the call by lifting it up from the cradle.
6. Press the Select/Save button to save.
NOTE: A check mark on the right side indicates the status of auto talk.
Contrast
1. Press Menu button once, then press the VOL ( 6 or 5) buttons until PHONE
SETTING is displayed.
2. Press Select/Save button to select.
3. Use the VOL ( 6 or 5) buttons of the sub-menu until CONTRAST is displayed.
4. Press Select/Save button to select
5. Use the VOL ( 6 or 5) buttons to select the LCD contrast level.
6. Press the Select/Save button to save.
Area Code
1. Press Menu button once, then press the VOL ( 6 or 5) buttons until PHONE
SETTING is displayed.
2. Press Select/Save button to select.
3. Use the VOL ( 6 or 5) buttons of the sub-menu until AREA CODE is displayed.
4. Press Select/Save button to select
5. Use the number pad to enter your three digit area code. The default is “---“.
6. Press the Select/Save button to store the setting.
Connections and Setup