RocketFish ROCKETBOOST RF-RBWS02-01 - Manual (Page 11)

11 RF-RBWS02-01
Setting up your wireless speaker
Powering your wireless speaker
Installing batteries in the wireless speaker
(skip this if you are not using batteries)
To install batteries in your wireless speaker:
Note: You will need a Phillips screwdriver.
1 Unscrew the bottom cover (three screws).
2 Insert eight alkaline or rechargeable NiMH C batteries matching the +/-
symbols as indicated.
Note : This product will only recharge NiMH batteries. Do not try to charge any other
batteries such as NiCad batteries in this product.
3 Replace the cover and fasten the three screws.
4 Turn on the wireless speaker using the power switch on the top panel.
8 NiMH or alkaline C batteries
(not included)
Bottom
RF-RBWSO2-01_11-0480 _MAN_V1.fm Page 11 Tuesday, May 24, 2011 3:42 PM