RCA 1998 - Manual (Page 14)

First Things First
12
Connection C
Good Picture and Sound Quality
To use this connection you must have:
• TV with RF input (jack)
• VCR with RF and audio/video inputs
• Coaxial and audio/video cables
To connect TV, VCR, and antenna or cable box:
1. Connect coaxial cables and audio/video cables as shown.
To receive satellite programming:
• Tune TV to channel 3 or 4 (depending on how you set the
CH3/CH4 switch on the back of the receiver).
To receive off-air programming (no cable box):
1. Turn off VCR and receiver.
2. Tune TV to desired channel.
To receive cable programming (with cable box):
1. Turn off VCR and receiver.
2. Tune TV to cable box output channel (usually CH2, CH3, or
CH4).
3. Tune cable box to desired channel.
To record satellite programming:
1. Tune TV to the channel on which you receive the satellite
signal.
2. Tune receiver to desired channel.
3. Set VCR to record on line input.
To view VCR programming:
1. Tune TV to VCR output channel (usually CH3 or CH4).
2. Turn receiver off.
VIDEO
DIGITAL
SATELLITE
RECEIVER
VCR IN FROM ANT
OUT TO TV
CABLE
OR
OFF-AIR ANTENNA
L R
SATELLITE IN
AUDIO
L
IN
R
L R
VIDEO
AUDIO
AUDIO IN VIDEO IN
SATELLITE
DISH
CH3
CH4
TV
OUT TO TV
IN FROM ANT
AUDIO OUT VIDEO OUT
CH4
CH3
CAUTION
Do not stack electronic
components or other objects on
top of the receiver. See Safety
Information, inside front cover.