Roberts Radio R9921 User Manual

Page 9

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)

4. Press and hold down the Tuning up or down

buttons until the frequency in the display begins
to change rapidly, release the button.

5. The radio will now start to search the FM waveband

and will stop when it finds a station of sufficient
strength. If the station is of sufficient strength the

symbol will light up in the liquid crystal

display.

6. Slide the Clock auto adjust switch to the ‘On’

position.

7. The time segments --:-- will flash in the liquid crystal

display indicating that the radio is waiting for the
RDS time signal. When the time is set the display
will show the time. If the clock does not set within
three to four minutes, the radio station may not be
transmitting clock time (CT) information - try another
radio station.

8. When your radio is switched off the

symbol will remain lit indicating that the time has
been set via the RDS signal.