Roberts Radio R9921 - Manual (Page 13)

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
Search tuning
1. Switch on your radio by pressing the Power
button.
2. Select the required waveband by repeat pressing
of the Bands button. The waveband selected
will appear in the display. On FM and SW fully
extend the Telescopic aerial. On MW rotate
your radio for best reception.
3. Press and hold down either the Tuning + or -
buttons until the frequency in the display begins
to change rapidly. Release the button.
4. Your radio will scan the selected waveband,
stopping each time it finds a station of sufficient
strength. Adjust the Volume and Tone controls
to the required settings.
5. On SW direct access to your chosen band can
be made by repeatedly pressing the Meter -SW
button.
11