Roberts Radio R9921 - Manual (Page 14)

1. Switch on your radio by pressing the Power
button.
2. Select the required waveband by repeat pressing
of the Bands button. The waveband selected
will appear in the display. On FM and SW fully
extend the Telescopic aerial. On MW rotate
your radio for best reception.
3. A single press on either the Tuning + or -
buttons will change the frequency up or down.
The frequency steps are:- FM 50kHz, MW 9kHz
or 10kHz and SW 5kHz. Adjust the Volume and
Tone controls to the required settings.
5. On SW direct access to your chosen band can
be made by repeatedly pressing the Meter -SW
button.
Manual tuning
12