Rinnai V3237FFU - Manual (Page 17)

17
Rinnai Corporation V3237 Models
C O N T R O L L E R S S E T PAT T E R N / T E M P E R AT U R E TA B L E S
Temperature Controllers allows precise temperature control by the user. When used correctly,
the hot water unit will deliver the selected temperature, even when the water flow is varied,
or more than one tap is in use. Each Temperature Controller can be individually programmed,
however, the water heater unit can only deliver one set temperature at any time. The available
temperatures (
O F) are as follows:
Suggested temperatures are:
Kitchen 120 O F, Shower 98 O F, Bath fill 102 O F
These temperatures are suggestions only. You may find higher or lower temperatures more comfort-
able. Maintaining lower temperatures helps save energy. To obtain water temperatures lower than
98
O F, simply add cold water.
Deluxe Controllers are an optional extra. Controllers and Deluxe Controllers can be installed together.
Controllers allow temperature selection only. Deluxe Controllers have temperature selection, bath fill
and clock functions.
Controllers allow the water temperature to be set from the various locations where they are
installed. The temperature selected will be available to all outlets. Below are the combination of
Controllers that are offered by Rinnai:
**See controller manual in controller carton box for more detailed information.
Temperature Table by Models
Controllers Combination Pattern
Water Smart / Bath Fill Temperature Table
Water Smart / Bath Fill temperature
Cannot exceed 120°F.
U273-430(00).indd 17 06.2.8 10:36:51 AM