RCA F20TF10 - Manual (Page 24)

Using the Remote Control
22 Chapter 2
STOP PAUSE
TV ON OFF
AUX DVD SAT CABLE
PLAY FORWARD REVERSE
SOUND GO BACK
CH +
CH -
V O L V O L
SKIP MUTE
INFO
MENU
OK
CLEAR
GUIDE
ANTENNA
1 2 3
4 5 6
7 8 9
0
WHO INPUT
VCR1
VCR2
REC•VCR+
The Buttons on the Remote Control
0-9 (Number buttons) Enter channel numbers and time settings directly through the
remote control.
To enter a two-digit channel, press the two digits. To enter a three-digit channel, press
and hold the first digit for two seconds until two dashes appear to the right of the
number, then add the second two. Example: to tune to channel 123, press and hold 1 for
two seconds, press 2, then press 3.
Arrow buttons (up, down, left, right) Press the arrow buttons to move through the
on-screen menu system.
ANTENNA Functions as TV/VCR button in VCR mode and TV/receiver button in
SAT•CABLE mode.
AUX (auxiliary) Puts the remote in auxiliary mode to operate the component you’ve
programmed the remote to operate with this button. You can program this button to
control a cable box, most RCA, GE and Proscan audio components, a laserdisc player, or
a VCR. If you set up the Auto Tuning feature (Chapter 3), pressing the AUX button
automatically tunes the TV to the correct channel.
CH (up and down) buttons Scan up or down through the current channel list. Press
once to change the channel up or down; press and hold to continue changing channels.
CLEAR Removes any menu or display from the screen and returns you to
TV viewing.
DVD Puts the remote in DVD mode. If you set up the Auto Tuning feature (Chapter 3),
pressing the DVD button automatically tunes the TV to the
correct channel.
FORWARD If you’re operating a VCR or DVD Player with the remote control, press
FORWARD to advance a disc or videotape.
GO BACK Returns you to the previous channel.
GUIDE Press GUIDE to make the GUIDE Plus+ system appear on the screen: press
GUIDE again to remove it from the screen.
INFO Displays channel information.
L.E.D. (light-emitting diode) The little light on the remote that lights when you are
programming the remote. It also lights when you press a valid button on
the remote.
MENU Displays the TV’s Main menu. You can also press and hold for 2 seconds to
display the GUIDE Plus+ system.
MUTE Lowers the volume to its minimum level. Press again to restore volume.
OK When a menu is on the screen, press OK to select the item that
is highlighted.
ON•OFF Turns the TV on and off. When the remote is in another mode (VCR, DVD,
Satellite, etc.) and the remote is programmed to operate that component, you can press
ON•OFF to turn the component on and off.
L.E.D.
1569452A.02 Remote 4/9/02, 12:57 PM 22