RoyalTek RTW-1000 - Manual (Page 21)

~ 21 ~
RTW-1000 Operational Manual
GPS DIAGNOSE
There are two ways to turn on/off your Empus Pocket PC's GPS
function manually.
1. Thru embedded software. Users will notice the GPS icon
on
the button right of the Today screen. Tab on it will bring up a quick
diagnose window, which allows the users to switch on and off the
GPS function of the Empus Pocket PC manually.
2. Thru embedded hotkey operation. The GPS function of the
Empus Pocket PC can be turned on/off by operating the GPS button
on the right side of the Empus Pocket PC (see page 8). By holding
the GPS button, the users will be able to detect the change in GPS
status by the change of color of the GPS icon. The green GPS
icon
represents the Empus Pocket PC is running with the GPS
function turned on. The red GPS icon represents the Empus
Pocket PC is running with the GPS function turned off.
Note: Normally, the GPS function of the Empus Pocket PC will be
automatically turned on by the navigation system.
STARTING NAVIGATION
1. Switch on the Pocket PC.
Start the navigation program in the program directory of your
Pocket PC.
² Hint: The GPS-receiver will require some minutes for
initialization when deployed for the first time. Even when GPS
signal reception is indicated the navigation could be imprecise.
In all future instances it will take about 30-60 seconds until a
correct GPS-signal is available.
2. Click on Enter a destination to specify your destination. In order
to obtain detailed information about how to use the program
click on the Help button.