RoyalTek RTW-1000 - Manual (Page 14)

~ 14 ~
RTW-1000 Operational Manual
WORKING WITH MEMORY CARDS
Your Pocket PC supports MMC and SD memory cards.
I NSERTING M EMORY C ARDS
1. Carefully take the memory card out of its packing (if included).
Take care not to touch or dirty the contact points.
2. Push the memory card carefully into the card slot as shown. The
side of the memory card wearing the label must point upwards.
The memory card should slightly lock in place.
R EMOVING M EMORY C ARDS
² Do not remove the memory card while it is being accessed. This
could result in the loss of data.
1. To remove the card press lightly on the SD card and it will eject
itself.
2. Pull the card out without touching the contacts.
3. Store the memory card in the packing or in another safe
location.
² Memory cards are very fragile. Take care not to dirty the
contacts and not to force the card.
A CCESSING M EMORY C ARDS
Memory cards are normally shown as Storage Cards in the Windows
Explorer
.
You can access the memory card like a normal drive to store,
rename or delete files.
² The Pocket PC only supports memory cards in the FAT16/32 file
format. If you insert a card prepared with a different format
(e.g. in cameras, MP3 players), your Pocket PC may not
recognize it and will ask you to format it again.
Warning
: Formatting the memory card wipes out all data.
² Likewise you cannot just copy files onto the memory card. In
some cases, the files must be converted by the Microsoft 
ActiveSync
 program.