Radio Shack ET-1105 - Manual (Page 21)

21
REVIEWING CALLER ID
RECORDS
1. Press CALL ID . xx NEW CID
TOTAL CID=xx appears.
2. Repeatedly press REVIEW ▲ to see
more recent calls or REVIEW ▼ to
see older calls.
3. To see the Caller ID record number
and date/time, press / twice.
Note: If you do not press a button
within 10 seconds while you are re-
viewing Caller ID records, the ET-
1105’s display automatically blanks
out.
STORING CALLER ID
RECORDS IN A MEMORY
LOCATION
1. Press CALL ID . xx NEW CID
TOTAL CID= xx appears.
2. Repeatedly press REVIEW ▲ or ▼
until you see the desired Caller ID
record.
3. Press MEM twice, then enter the
memory location number. The ET-
1105 beeps and the phone number
is stored.
DIALING NUMBERS FROM
A CALLER ID RECORD
1. Press CALL ID , then press REVIEW
▲ or ▼ until you see the phone
number you want to dial.
2. Press CALLBACK. The ET-1105 di-
als the displayed phone number.
If the phone number’s area code
does not match the stored area
code, the system automatically dials
a 1 before dialing the displayed area
code and 7-digit phone number.
(See “Setting the Area Code” on
Page 12.)
DELETING CALLER ID
RECORDS
The ET-1105 lets you delete individual
Caller ID records or all reviewed Caller
ID records at one time.
To delete a single Caller ID record:
1. Press CALL ID then repeatedly
press REVIEW ▲ or ▼ until the
record you want to delete appears.
2. Press DELETE . DELETE ? appears.
3. Press DELETE again. DELETE OK
appears.
To delete all Caller ID records:
1. Press CALL ID then press DELETE .
DEL ALL OLD ? appears.
2. Press DELETE . DELETE OK ap-
pears.
CALL ID
43-1105.fm Page 21 Monday, August 30, 1999 1:57 PM