Radio Shack DX-392 - Manual (Page 18)

18
PLAYING A CASSETTE TAPE
1. Set STANDBY REC to OFF .
2. Set TAPE SELECT to either NOR-
MAL or CrO
2
according to the type
of tape you are going to play.
3. Press PLAY . The PLAY indica-
tor lights.
4. Adjust VOLUME to a comfortable
listening level.
5. To stop the tape, press STOP/
EJECT . Press STOP/EJECT
again to open the cassette com-
partment’s door and remove the
cassette tape.
Notes:
• To temporarily stop playback,
press PAUSE . To resume play-
back, press PAUSE again.
• At the end of a tape, the tape
motor automatically stops and the
selected button (
PLAY ,
RECORD , CUE/FAST-F , or
REVIEW/REWIND ) pops up.
• To play the other side, turn the
cassette tape over.
Fast-Forward and Rewind
Press CUE/FAST-F to rapidly ad-
vance a tape. Press REVIEW/REWIND
to quickly rewind a tape. When the
tape reaches the desired point, press
STOP/EJECT .
Caution: To avoid damaging the tape,
do not go directly from rewind to fast-
forward or from fast-forward to rewind
without pressing
STOP/EJECT first.
Cue and Review
Holding down CUE/FAST-F while
playing a cassette tape lets you cue
(play the cassette tape at high speed)
so you can quickly locate any desired
section on the tape. When you release
CUE/FAST-F , the recorder returns
to normal play.
Holding down REVIEW/REWIND
after you press PLAY lets you re-
view (play the cassette tape in re-
verse at high speed). When you
release
REVIEW/REWIND , the re-
corder returns to normal play.
20-219.fm Page 18 Wednesday, August 4, 1999 9:23 AM