Radio Shack DX-392 User Manual

Page 11

Tuning with the Arrow Keys

You can select a lower or higher fre-
quency by pressing

MANUAL/AUTO

. The frequency changes in

the following increments.

Scanning

To automatically tune up or down to
the next active frequency in the se-
lected band, press and hold down

MANUAL/AUTO

for about 2

seconds. The receiver scans up or
down the selected band and tunes to
the first frequency it finds with a strong
signal.

To scan for a frequency in one of 13
shortwave bands, press

METER

. Then

press the correct button on the numer-
ic keypad to select the shortwave
band.

When scanning in a smaller band, the
receiver searches only within the se-
lected band and stops at the upper and
lower limits of the band.

See “International Frequencies” on
Page 23 for a list of the shortwave
bands.

Note: When scanning, the receiver
only searches for frequencies with
strong signals. To search for stations
with weaker signals, use one of the
manual tuning methods.

Band

Tuning Increment

0.1 MHz

9 kHz

MW
(AM)

9 or 10 kHz (see
“Setting the MW (AM)
Tuning Increment” on
Page 6)

0.005 MHz

20-219.fm Page 11 Wednesday, August 4, 1999 9:23 AM