Radio Shack 1250 - Manual (Page 14)

14
MEMORY DIALING
You can store up to 20 numbers in
memory and dial any stored number by
pressing one or two keys.
Each stored number can be up to 24
digits long.
Storing a Number in Memory
The System 1250 has 10 memory loca-
tion buttons, and each button can recall
two stored numbers: one upper memory
number and one lower memory number.
Follow these steps to store a number in
memory.
Notes:
• You must complete each step within
15 seconds.
• To keep your accounts secure, we
recommend you do not store per-
sonal access codes for services
such as bank-by-phone.
• Leave the handset on the base
when you store numbers.
1. Press SAVE . ENTER NUMBER ap-
pears.
2. Enter the number you want to store,
including any pause or TONE entries
(see “Entering a Pause in a Memory
Number” on Page 15 or “Using Tone
Services on a Pulse Line” on
Page 13).
You can store the very last number
you dialed by pressing
REDIAL .
Notes:
• If you make a mistake while en-
tering the number, press SAVE to
exit and start again at Step 1.
• If you enter more than 24 digits,
the number flashes. Wait 15 sec-
onds or press
SAVE to exit and
start again at Step 1.
3. Choose a memory location and
store the number there.
• To store an upper memory loca-
tion, simply press a memory loca-
tion button.
• To store a lower memory location,
press LOWER ( LO appears), then
press a memory location button.
Memory
LOWER
Location
Buttons
43-986.fm Page 14 Monday, August 16, 1999 5:16 PM