Ricoh AC122 - Manual (Page 72)

2
G ETTING S TARTED 2.47
5 Check Set IP and then click Next.
6 When the installation is completed, click Finish.
To Use Set IP
1 From the Start menu, select Type 103 in Programs, and
click Set IP.
2 Click to find printer on the local network, or click
and type the printer’s MAC address.
N OTE : To configure the MAC address, see the NETWORK PRINTER
CARD TEST PAGE. To Print the NETWORK PRINTER CARD TEST
PAGE, refer to “Printing a Network Configuration Page” on
page A.5.
3 Type IP address, Subnet Mask and Default Gateway, and
then click [Config].
4 If it is successfully is completed, the printer prints
NETWORK PRINTER CARD TEST PAGE.