Ricoh AC122 User Manual
Page 62
2
G
ETTING
S
TARTED
2.37
6
Click Finish.
N
OTE
: After setup is complete, if your printer driver doesn’t work
properly, reinstall the printer driver.
Custom Installation for Network Printing
You can choose individual components to install and set a
specific IP address.
1
Make sure that the printer is connected to your network and
powered on. For details about connecting to the network,
see the System Administration Guide.
2
Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation
window appears.
If the installation window does not appear, click Start and
then Run. Type X:\setup.exe, replacing “X” with the letter
which represents your drive and click OK.