Remington 500V - Manual (Page 23)

23
106763
Outer Liner Assembly
Figure 19 - Replacing Sear
Figure 18 - Replacing Firing Pin
Guide, Firing Pin Assembly, Spring,
Transfer Pin, and Push Pin
Firing Pin
Guide
Sear
Sear
Spring
Push Pin
Firing Pin
Assembly
Transfer Pin
Firing Pin
Guide
Outer Liner Assembly
E. REPLACING FIRING PIN
1. Insert transfer pin and push pin into outer liner assembly (see Figure 18).
2. Place sear spring into firing pin assembly. Slide firing pin assembly into outer liner
assembly (see Figure 18). Slide the firing pin guide onto the outer liner assembly.
Align the holes in the firing pin guide, the outer liner assembly, and firing pin
assembly so that the sear can pass easily through all three (see Figure 19).
3. Depress sear spring with sear and slide the sear and firing pin guide toward the
front of the tool.
F. REPLACING ROCKER ARM ASSEMBLY
1. Place rocker arm assembly, with rocker arm spring attached, into housing. The
rocker arm assembly will sit on top of the firing pin guide.
2. Push rocker arm pin through the housing and rocker arm assembly with a punch
and hammer.
3. Insert firing pin spring into outer liner assembly. Slide larger spring onto the
outer liner assembly.
Figure 20 - Replacing Rocker Arm Assembly into Housing
Rocker Arm Spring
Rocker Arm Pin
Firing Pin Spring
Spring
Housing
Rocker Arm Assembly
Firing Pin Guide
Firing Pin Guide
Sear
Continued