Remington 500V - Manual (Page 20)

20
106763
Outer Liner Assembly
E. REMOVING FIRING PIN
1. Slide firing pin guide back so the slot in the firing pin guide lines up with the slot
in the outer liner assembly.
2. Pull the sear out of the aligned holes (see Figure 8).
3. Slide firing pin guide off of the outer liner assembly (see Figure 9). Pull the firing
pin assembly with sear spring out of the outer liner assembly. Remove sear
spring from firing pin assembly (see Figure 9).
4. Remove transfer pin and push pin from outer liner assembly (see Figure 9).
Figure 8 - Removing Sear
Figure 9 - Removing Firing Pin
Guide, Firing Pin Assembly, Sear
Spring, Transfer Pin, and Push Pin
Figure 10 - Removing Trigger and Pawl Assembly
Housing
Firing Pin
Guide
Sear
Sear Spring
Push Pin
Firing Pin
Assembly
F. REMOVING TRIGGER AND PAWL ASSEMBLY
1. Slide trigger out of housing (see Figure 10).
2. Using a phillips head screw driver, loosen screw and remove pawl assembly
components from housing (see Figure 10).
Transfer Pin
Tool Disassembly (Cont.)
Firing Pin
Guide
Outer Liner
Assembly
Pawl
Assembly
Trigger