Remington 500V - Manual (Page 21)

21
106763
Figure 13 - Removing Outer Liner Assembly
G. REMOVING ADVANCE BAR
1. Using a 3mm hex wrench, loosen screws on cover and remove.
2. Remove advance pin with hammer and punch.
3. Remove advance bar and spring.
H. REMOVING BAFFLE ASSEMBLY
1. Loosen and remove baffle assembly and o-ring.
Figure 11 - Removing Advance Bar
Figure 12 - Removing Baffle
I. REMOVING OUTER LINER ASSEMBLY FROM HOUSING
1. Grasp outer liner assembly and firmly pull from housing.
WARNING: Always unload a powder actuated tool before disassembling,
replacing barrel, cleaning, or assembling.
A. INSERTING OUTER LINER ASSEMBLY
1. Firmly push outer liner assembly into housing (see Figure 14).
Figure 14 - Inserting Outer Liner Assembly
Tool Assembly
Continued
Screws
Cover
Advance Bar and Spring
Housing
Advance Pin
Baffle Assembly
O-Ring
Housing Handle
Outer Liner Assembly
Housing
Outer Liner Assembly
Housing