Radio Shack PRO-2018 - Manual (Page 10)

10
A
Look
at
t
he Dis
pl
ay
F=C
Appears when you program frequencies into the scanner's
channels.
FH?
Appears when the priority feature is turned on.
:BO
Appears when you program a 2-second delay.
7BBý9>ýBe$#ekj
Appears when you lock out all frequencies in the marine
bank.
XýNý#
Appears when you try to enter a frequency during a search
when all displayed bank’s channels are full.
#ZKFB#
Appears when you try to store a frequency that is already
stored in another channel.
Z<7KBj
Appears when you remove all the lock-outs from the FD/PD,
AIR, or HAM bank frequencies.
:#;hheh
Appears when the scanner receives a data error during
wired programming.
;dZ
Appears when the scanner has finished wired programming.
;hheh
Appears when you make an entry error.
Appears when you remove all the locked-out frequencies
during a FD/PD, AIR, or HAM bank or tune search.
Appears when you try to lock out a frequency during a tune
or search when 50 frequencies are already locked out.
<ýB#ekj
Appears when you start a tune from a locked-out frequency.
B#h
Appears when you review locked-out frequencies.
e<<ýjed;
Appears when you turn the key tone off.
20-424.fm Page 10 Monday, September 9, 2002 9:44 AM