Radio Shack ET-916 - Manual (Page 15)

15
6. Attach the sticker to the phone.
To erase a stored number, simply
store a new number in its place.
Or, lift the handset, press TALK if the
TALK/BATT LOW indicator lights, and
press
MEMO twice. Then press the
memory location number ( 0 – 9 ) you
want to clear. A tone sounds.
Entering a Pause
In some telephone systems, you must
dial an access code (
9 , for example)
and wait for a second dial tone before
you can dial an outside number. You
can store the access code with the
phone number. However, you must
also store a pause after the access
code to allow the outside line time to
connect. To do so, press
REDIAL/P .
Each press enters a 2-second pause.
For a longer pause, press
REDIAL/P
additional times.
Dialing a Memory Number
To dial a number stored in memory, lift
the handset or press
TALK . The TALK/
BATT LOW indicator lights.
When you hear a dial tone, simply
press
MEMO and enter the memory lo-
cation number for the number you
want to dial.
Chain-Dialing Service
Numbers
When calling special services (such as
alternate long distance or bank by
phone), dial the service’s main number
first. Then, at the appropriate place in
the call, press
MEMO and the number
for the location where the additional in-
formation is stored.
Testing Stored Emergency
Numbers
If you store an emergency service’s
number (police department, fire de-
partment, ambulance) and you choose
to test the stored number, make the
test call during the late evening or early
morning hours to avoid peak demand
periods. Also, remain on the line to ex-
plain the reason for your call.
43-1086.fm Page 15 Tuesday, August 17, 1999 2:39 PM