Ricoh 850 - Manual (Page 511)

Job Preset
61
2
To set the original in the document feeder
A Set a stack of originals in the document feeder, then press the {
Start } key.
Note
❒ The last page should be on the bottom.
To set the original on the exposure glass or in the document feeder using
Batch(SADF) mode
Reference
See
⇒
P.32 “Batch (SADF) mode”.
A Set the original, then press the {
Start } key.
Note
❒ Start with the first page to be copied.
B When it has been scanned in, set the next original, then press the {
Start }
key.
Note
❒ Set the original in the same direction as the first one.
C After all originals have been scanned, press the {
# } key.
The copies are delivered to the tray.
Note
❒ When you wish to return the copying display, press the [Copying] key on
the display panel.
Editing Job Preset
A
Press the [Job List] key.