Setting originals, Setting originals on the exposure glass, 2setting originals – Ricoh 850 User Manual

Page 476

Text mode
Original mode

Copying

Setting Originals

Limitation

❒ Set originals after correction fluid and ink has completely dried. Not taking

this precaution could mark the exposure glass and cause marks to be copied.

Note

❒ Normally originals should be aligned to the rear left corner. However, some

copy functions may produce different results depending on the direction of
the originals. For details, see the explanations of each function in this manual.

Reference

See

⇒

P.15 “Originals”.

Setting Originals on the Exposure Glass

Lift the document feeder.

Note

❒ Be sure to open the document feeder by more than 20

otherwise the orig-

inal size might not be detected correctly.

This manual is related to the following products:

1050