To reassemble universal joint, Smear grease into bearings and check for dirt, Insert cup and cross. drive in with spacer – Rhino Mounts NITRO FN20 User Manual
Page 149: Insert snap ring, To reassemble universal joint -9, Maintenance
MAINTENANCE
FN20/FN14 NITRO 02/10
Maintenance Section 5-9
© 2010 Alamo Group Inc.
MAINTENANCE
TO REASSEMBLE UNIVERSAL JOINT
1.
Smear grease into bearings and check for
dirt.
CAUTION! Make sure all needle bearings are
seated properly.
2.
Insert cup and cross. Drive in with spacer.
3.
Insert snap ring
4.
Insert second cup and hold cross into cup.
Drive cup flush with arm.
This manual is related to the following products: