Radio Shack TRC-232 - Manual (Page 24)

24
Scanning Incoming Signals
To scan incoming signals, press SCAN . SCAN appears on the
display, and the walkie-talkie stops for 5 seconds on each chan-
nel where there is a transmission. Press
SCAN again to stop au-
tomatic scanning. SCAN disappears from the display.
Alternating Between Two Channels
To alternate between two channels, select one channel and
press
DW (dual watch). DW appears on the display. Using the UP
or DWN channel buttons, select another channel.
21-1672.fm Page 24 Thursday, August 5, 1999 12:04 PM