Radio Shack TRC-232 - Manual (Page 21)

21
TRANSMITTING
1. Follow the steps described in “Receiving Transmissions
and Adjusting Squelch.”
2. To transmit, press PTT . TX appears on the display. The RF
Out meter on the display shows the output level. Hold the
walkie-talkie about 2–3 inches from your mouth and speak
slowly and clearly in a normal tone of voice.
Note: A built-in automatic modulation circuit adjusts the
microphone’s sensitivity to allow for a wide variety of voice
levels.
3. When you finish transmitting, release PTT .
21-1672.fm Page 21 Thursday, August 5, 1999 12:04 PM