beautypg.com

Installing a belt clip, Using an optional headset – Radio Shack 43-141 User Manual

Page 8

background image

Installing a Belt Clip

To attach the belt clip, insert the belt
clip into the holes on each side of the
cordless handset. Press down until it
clicks.
To remove the belt clip, pull either side
of the belt clip to release the tabs from
the holes.

Using an Optional Headset

You can make or answer calls handsfree using an optional
headset that has a 3/32-inch (2.5-mm) plug. Your local

RadioShack store has a variety of headsets available.

To connect the headset, gently flip
open the rubber headset jack cover
on the side of the cordless handset.
Then insert the headset’s plug into
the jack.
Use

or on the handset to

adjust the headset’s volume.
With a headset connected, you can make or answer
calls as usual using the keys on the handset.
When you finish using the headset, disconnect it from the
handset and close the rubber cover to protect the jack.

1.

2.

3.

4.

UU01639BZ_1.indd 8

12/18/2006 11:09:38 AM

This manual is related to the following products: