Radio Shack 43-141 - Manual (Page 11)

11
3. DEREGISTER HS appears. Move the cursor to select
YES. Press the OK soft key.
4. ARE YOU SURE? appears. Move the cursor to select
YES, and then press the OK soft key. You will hear a
confirmation tone.
Resetting the Handset Without
the Base
If the original base this handset was registered to is
not available for some reason (for example, it is lost or
somehow incapacitated), you can still reset the handset
and use it with another base.
1. Press and hold and # for more than 5 seconds, until
the SYSTEM RESET menu appears.
2. Select the BASE UNAVAILABLE submenu.
BASE UNAVAILABLE appears in the display.
3. Move the cursor to select YES, and then press the OK
soft key. When ARE YOU SURE? appears, select YES.
You will hear a confirmation tone, and the handset
deletes its own link to the base without trying to
contact the base.
Now you are ready to register the handset to the new
base.
UU01639BZ_1.indd 11 12/18/2006 11:09:39 AM