Ruckus Wireless MF2501 - Manual (Page 33)

8000003, December 2005 MediaFlex 2501 Multimedia Wireless Adapter User’s Guide 33
Configuring the MF2501 Adapter
Configuring WPA PSK
WPA PSK configuration menu allows automatic key generation based on a single passphrase. WPA PSK
provides very strong security, but may not be supported on older systems.
If you configure the MF2501 Adapter with WPA-PSK, the other devices in the network will not connect
unless they, too are set to WPA-PSK, and are configured with the same passphrase.
1. Click the Configuration -> Wireless link in the left-hand navigation pane ( Figure 6 ).
2. Select WPA-PSK in the Security drop-down menu.
3. Click the Edit Security Settings button.The WPA Configuration appears ( Figure 9 ).
Figure 9—WPA Configuration
Table 12 explains the WPA Configuration parameters
Table 12—WPA Configuration
Field Description
PassPhrase / Confirm Enter a passphrase and enter it again in the Confirm field.