Radio Shack CT-502 - Manual (Page 61)

61
USING TOUCH-TONE SERVICES
To use your cellular phone to control answering machines
and special telephone services (such as bank-by-phone or
voicemail), simply enter touch-tone commands using your
phone’s keypad after the service answers (and when prompt-
ed).
Note: If the silent scratchpad function is turned on, you must
press
to send the tones after entering each set of
touch-tone commands.
Or, you can store the service’s command sequence in a
memory location. After the service answers (for each se-
quence you want to send), simply recall the memory location
that contains the command sequence and press
.
Adding a Pause
Some services, such as voicemail, require you to enter an ac-
cess code then wait before entering additional digits. To in-
clude one or more pauses in a sequence when storing it in
memory, press
so Insert Pause o flashes, then
press . The phone displays o wherever you insert a
pause.
Note: If you do not press within 8 seconds, the display
clears. Simply press the key for the next digit you want to en-
ter or store. The characters you previously entered appear
along with the pause you just entered.
When you send a sequence with pauses stored in it, the
phone stops at each place in the sequence where you en-
tered a pause. To send the next group of numbers in the se-
quence, press
again.
RCL SND
RCL SND
FCN SND
STO
STO
SND
17-1111.fm Page 61 Wednesday, July 21, 1999 2:23 PM