Radio Shack CT-502 - Manual (Page 57)

57
Your phone’s selectable system registration function lets you
select one of six possible roaming modes:
Roaming Mode Description Display
Standard Mode — the phone first seeks a home type
system, then it seeks a non-home type.
If you are using a type A (non-wireline) home system Std AB
If you are using a type B (wireline) home system Std BA
Invert Preference Mode — the phone first seeks a non-
home type system, then it seeks a home type. (Select
this setting while on the fringe of your home area or in
certain roaming situations.)
If your home system is non-wireline (type A):
• Roam flashes rapidly — call on system B
• Roam flashes slowly — call on home type system
• InUse flashes slowly — call on home system
ScanBA
If your home system is wireline (type B):
• Roam flashes rapidly — call on system A
• Roam flashes slowly — call on home type system
• InUse flashes slowly — call on home system
ScanAB
Home Only Mode — the phone will not operate outside
your home system. Home
Scan A Mode — the phone will operate only within
non-wireline (A) systems. Scan A
Scan B Mode — the phone will operate only within
wireline (B) systems. Scan B
SID Mode — the phone automatically scans for one or
more preferred systems to use and one or more sys-
tems not to use. System IDs must be preprogrammed
by the dealer; preferred system (SID) feature requires
special service (contact your cellular carrier). P Scan
17-1111.fm Page 57 Wednesday, July 21, 1999 2:23 PM