Radio Shack 43-3905 - Manual (Page 9)

9
Using Flash
If you have Call Waiting, press FLASH to answer an incoming
call without disconnecting the current call. Press FLASH again
to return to the first call.
n
Note: If you do not have Call Waiting, pressing FLASH might
disconnect the current call.
Using Redial
To redial the last number you called, pick up the handset and
press REDIAL when you hear a dial tone. The number scrolls
across the display, and the phone automatically dials it.
n
Note: The redial memory holds up to 32 digits, so you can redial
long distance as well as local phone numbers.
Using Pause
Some telephone systems require you to dial an access code
(usually 9) and wait for a second dial tone before dialing an
outside number. When you manually dial a number, you can
have your telephone pause anywhere during the dialing
sequence. Simply press PAUSE at the desired location.
When you redial a number, the telephone pauses for about four
seconds at the pause entry. For longer pauses, press PAUSE
again.
Caller ID Operation
If you subscribe to a Caller ID service, the phone automatically
displays information about calls you receive and stores the
information in Caller ID memory. The system can store up to 99
incoming phone numbers or 64 incoming phone numbers with
names into call records.